scoutman75
New member
Looking to talk to anyone who has installed a sbc into a 72-80 Scout II, have aquired a sbc 383 (pre 85 block with carb) with a borg warner supter t-10 4 speed and a Dana 300 tc I also have purchased the advanced adapter v-8 motor mount kit. What I'm looking for is the starting point measurements for the new mounts. The original mounting positions are about a 4 1/2" further forward than where the sbc mount should go.if there anyone who has actual experience doing one of these swaps I would be very greatful on any input.
Thanks
scott
Thanks
scott