Parting out 73 Travelall

E

egdinger

Member
Will be gone by Friday/Saturday. Currently has everything. What do you need?

392/727/205/front d44/rear sf60. Sort of a blue green color, interior has white trim.

Parts are in eastern oregon (la grande), but I can bring some stuff to portland sat/sun.
 
Here's the list:
1. Buckets or bench seats? Could use some high back buckets.
2. Did it have a tailgate worth saving? Need an electric window motor and switches for parts, don't need the metal, just guts...and
3. The rubber snubbers at the down window position for the tailgate window.
4. Would take a manual roll up too, complete tailgate.

I'm 15 miles from Jeff's new shop! Anybody coming down??? Mike 530-885-9427 can arrange for pick up at Binder Bee too if a nice IHSTO member could hold it for me.:icon_rotate: thanks.
 
List part 2

inner door skins for rear doors, passenger side is more important if you only have one good one. Thanks, Mike 530-885-9427
 
Sorry it's got bench seats. I'll gut the rear window motor and parts, they did work.

When you say inner door skins, do you mean the metal? If so they are decent shape, I'll pull them too.
 
Inner door skins- the metal that covers the door- yes. Mine have rust through at door threshold. I think they have about 10-12 screws holding it on plus door and window handles. Tailgate parts- thanks! If you can get the rubber bumper/snubber for the rear window that would be killer. They bust easily on the way out, had to let the sun and some olive oil warm/lube it up to get our's out. What do you need for all these gems? Thanks Mike
 
Eric, talked to Mike mayben, he said if you can get it to terry or monte, he'll transfer it down when he comes to Jeff's shop. Shoot me your address and I'll get a check to you. Thanks, Mike.
 
Is it gone or are parts still available? When did the motor last run? Is the carb a 4 barrel and is it good? Does it have a "third" rear seat and /or split middle seat? Is the headliner good? Exhaust manifolds (I think I need the passenger side)? Driver's side inner fender? Hood?

Thank's, dan
 
Last edited:
Please get that answered in the technical forum. Please post your request there, they usually have answers posted daily. Thanks
 
Dan, most of the parts are gone. On your list I have most of the head liner pieces, one or two of the plastic strips that hold the headliner up are missing, but the panels aren't in too bad of shape. And the drivers side inner fender is in good shape.

Scoutmaster1 I've gotten the parts on their way, and I'm going to talk to mayben to see what his plans are. Though I May have left the snubbers behind - they'll get to you.
 
egdinger said:
dan, most of the parts are gone. On your list I have most of the head liner pieces, one or two of the plastic strips that hold the headliner up are missing, but the panels aren't in too bad of shape. And the drivers side inner fender is in good shape.

Scoutmaster1 I've gotten the parts on their way, and I'm going to talk to mayben to see what his plans are. Though I May have left the snubbers behind - they'll get to you.
Click to expand...

Thanks eric, do you want to mail the snubbers? I still haven't got your address to send some $ to. I can wait until after your finals are over so it doesn't get put to the keg fund. Lol.
 
Do you still have this? You wouldn't by chance have the front and rear bumper would you? What kind of condition are they in? Thanks
 
Cornfed, I some of the parts still (inner/outer fenders, grill, valence, lenses, dash panels, some other interior bits), but not the bumpers.
 
You must log in or register to reply here.
Back
Top