GrandpaJoe
New member
I have 1968 International 1200c 4x4. I have 1977 3/4 ton Chevy axles. I have the appropriate 4' lift kit from Rough Country. I removed the shackle mounts, cleaned and painted. They go in the rear most location on the frame for the Chevy springs. However, the rubber bushings that go into the shackle mounts are bigger than the mounts. And the bushings and steele sleeve for the front eye are wider than the hanger. What needs to be done to rectify my situation? Different bushings? Trim the ones that came in the kit? 