I installed my va magnum. I need to run my hoses, 1'', 3/4''. I have looked at lowe's, autozone, napa, harbor freight, googled everything. I just can't seem to find any good grommets. I have seen the bulkhead connectors but I figured with 8 more fittings, thats 8 more chances to leak. I would like to just run hoses full length/one piece. Any body got anything? Thanks
bulkhead grommets
- Thread starter SC76TERRA
- Start date
mojave450rider
Member
If your in the so cal area there 2 stores called rvac electronics . One in montclair, CA and the other in riverside, CA
Robert Kenney
Super Moderator
An931-and ms35489 is to common an/ms spec for tubing grommets. A quick google should put on a supplier.
An931 is followed by a -#-# eg a an931-16-22 will fit a 1" od tube and in a 1 3/8 hole. The - numbers are 1/16 or -16 = 16 x 1/16 or 1".
Hope this helps and is what you are looking for.
An931 is followed by a -#-# eg a an931-16-22 will fit a 1" od tube and in a 1 3/8 hole. The - numbers are 1/16 or -16 = 16 x 1/16 or 1".
Hope this helps and is what you are looking for.
dkminors
Member
I have used this place For random parts like that when I can't find them elsewhere.