hooptytank
New member
Located in santa monica, CA 90405
all listed parts came with a project truck, and were supposed to be in known running condition by previous owner, but:
345 engine has low compression in 6 holes and around 80% leak down past rings. It has been rebuilt before since it has new std. Size rod, main and cam bearings, new oil pump, new cam and lifters. Will likely need re-ring or at least a good inspection. May be oversize bore, but not sure. Heads have older style 2 piece welded rocker arms. Will not include cam timing gears, or intake manifold but everything else like water pump, good water tubes, starter, some pulleys, chrome valve covers, oil pan. $ 80 obo
4 bbl, non egr, carter/Holley pattern intake manifold, with water outlet $old
borg warner model 11 /t39 automatic trans with converter, flexplate and crank spacer with bolts. Atf bright red. Dana model 20 transfer case attached to tranny, single stick. Both came attached to above motor, but working condition unknown, $150 obo prefer not to separate.
Scout II vacuum booster that works. Master included, but probably works as a core $40 obo
make offers on engine and trans or the whole lot. Sorry will not ship, but will help hoist stuff into your truck.
Will consider trade for d44 front housing, or 2wd beam. All I really need are the outer c and knuckle with hub and spindle to make my own custom width front beam
310-463-4964
all listed parts came with a project truck, and were supposed to be in known running condition by previous owner, but:
345 engine has low compression in 6 holes and around 80% leak down past rings. It has been rebuilt before since it has new std. Size rod, main and cam bearings, new oil pump, new cam and lifters. Will likely need re-ring or at least a good inspection. May be oversize bore, but not sure. Heads have older style 2 piece welded rocker arms. Will not include cam timing gears, or intake manifold but everything else like water pump, good water tubes, starter, some pulleys, chrome valve covers, oil pan. $ 80 obo
4 bbl, non egr, carter/Holley pattern intake manifold, with water outlet $old
borg warner model 11 /t39 automatic trans with converter, flexplate and crank spacer with bolts. Atf bright red. Dana model 20 transfer case attached to tranny, single stick. Both came attached to above motor, but working condition unknown, $150 obo prefer not to separate.
Scout II vacuum booster that works. Master included, but probably works as a core $40 obo
make offers on engine and trans or the whole lot. Sorry will not ship, but will help hoist stuff into your truck.
Will consider trade for d44 front housing, or 2wd beam. All I really need are the outer c and knuckle with hub and spindle to make my own custom width front beam
310-463-4964
Last edited: