2210 Question

7

77SSII

Member
Hey all,
truck is running rough. Won't idle on its own. Get it running w/out the air cleaner assy and I see atomized gas squirting out of the carb. Check out the pix.
I couldn't figure out how to put a g.d. Arrow in the picture....
The hole is directly below the "I" in squirting in my caption:winky:
if I put my finger over it the truck runs well. If I cover up the second hole on the drivers side, nothing happens.
I was just rebuilt. Any thoughts?

https://picasaweb.google.com/107722218277971181704/august192011
 
Sorry, had the privacy set to me only. It is public now but I figured out why...check out my other thread.
 
We have already talked about this today Mark but I figure that for the sake of our readers I'll post a response.

Those are the air bleeds the the emulsion air is drawn in through along with fuel from the idle fuel jet in the carb. Any fuel propelled out of those and no where else is being driven from below the throttle plates from either a intake valve being stuck open or a very out of time ignition event...

Sorry for the bad news. :( I know you have been thought the mill with this one.

Let us know what you find if you dig in deeper.
 
You must log in or register to reply here.
Back
Top