IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Fuel Injection
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 07-08-2014, 05:44 PM   #1
Scooter
Senior Member
 
Scooter's Avatar
 
Join Date: Feb 2009
Member Number: 917
Location: Richmond, CA
Posts: 1,739
Default Voltage checks?

In regards to finalizing the install of hamilton TBI.

Ok, I'm stumped and couldn't find a list of what specs should be on the mythical voltage checks.
Quote:
Originally Posted by bill usn-1 View Post
I know the first thing guys want to do when hooking up their fuel injection set up is to start it up and hear it run....
after you performed the voltage checks!!
Either I'm starting to get alzheimer's disease or I'm missing something. Searched through this forum and others and still couldn't find a definitive list of which parts to check along with what the voltages should be. The info just might be spread out inside multiple threads.
__________________
The fleet
73 Scout II - 73 Beast SOA, Shackle Reversal. Several things being re-worked through out.
72 Scout II - Ole Yeller - Finally rolling around town.
74 Scout II - Barrel Rolled - Rest in peace
72 Scout II = SOLD
51 Studebaker pickup - A non running project. Slowly in the works
Scooter is offline   Reply With Quote
Old 07-08-2014, 06:23 PM   #2
Bill USN-1
F.I. Moderator
 
Bill USN-1's Avatar
 
Join Date: Jan 2007
Member Number: 7
Location: Oak Harbor, WA
Posts: 467
Default Re: Voltage checks?

If you're installing my system then no voltage checks are required. As long as you have it installed per the installation manual all is good. 12v on starter and 12v from the switch to the small pink wire as shown. No ballast resistor.
__________________
Bill USN-1

COMMITED TO TEACHING PEOPLE THE "PROPER" WAY TO EFI
HAMILTON FUEL INJECTION
May be the answer to all your fuel injection needs!
Learn to do it right.
Bill USN-1 is offline   Reply With Quote
Old 07-09-2014, 06:43 AM   #3
Scooter
Senior Member
 
Scooter's Avatar
 
Join Date: Feb 2009
Member Number: 917
Location: Richmond, CA
Posts: 1,739
Default Re: Voltage checks?

Thanks bill.
That confirmed my thoughts. But I wanted to double check. Overall an easy install and well laid out. Hopefully I'll get the owner of this install to start up a build thread of his 69 800 where your kit is being installed.

As a side note, if one was piecing together a kit, what components need to be checked? Along with what voltage specs?
__________________
The fleet
73 Scout II - 73 Beast SOA, Shackle Reversal. Several things being re-worked through out.
72 Scout II - Ole Yeller - Finally rolling around town.
74 Scout II - Barrel Rolled - Rest in peace
72 Scout II = SOLD
51 Studebaker pickup - A non running project. Slowly in the works
Scooter is offline   Reply With Quote
Old 07-15-2014, 11:12 AM   #4
Bill USN-1
F.I. Moderator
 
Bill USN-1's Avatar
 
Join Date: Jan 2007
Member Number: 7
Location: Oak Harbor, WA
Posts: 467
Default Re: Voltage checks?

If you look at the wiring FAQ at the bottom it specifies to perform the voltage checks listed on sheet 1 of the diagrams.

In the parts required FAQ there are additional specs for the individual parts.
__________________
Bill USN-1

COMMITED TO TEACHING PEOPLE THE "PROPER" WAY TO EFI
HAMILTON FUEL INJECTION
May be the answer to all your fuel injection needs!
Learn to do it right.
Bill USN-1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 01:44 AM.