IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > IH Parts America Area > IH Parts America Build-Ups
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 12-27-2012, 02:04 PM   #1
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Jim's 1968 Scout 800

This build originally started as a mild drivetrain update to a 1962 Scout 80 to make it more suitable as a daily driver. The original plan was for our customer jim to bring up his already purchased Scout to our shop for a install of a set of modern axles he had purchased from a private party, swap out the 152 4cyl/3speed for a GM 4.3 v6 and 700r4 auto transmission and change out the Dana 18 transfer case for a Dana 300. For suspension a custom variation of our CPT Scout 80/800 suspension kits for some lift and a CPT reverse shackle kit for a smoother ride. While here jim also wanted a custom seatbelt bar fabricated for his half-cab so that shoulder belts could be used. To make things easier to stop and steer a Scout II power steering box and custom hydroboost. And last a modern update to the gauge package and rewire the electrical system.

After the plan was finalized and a date scheduled jim brought up his Scout for us to begin work on it. Upon inspection of his Scout we found that it had a bent frame due to a previous auto accident and severe enough damage to the body itself(the driver door no longer closed properly, major inner fender damage, etc) was enough reason for us to recommend to not build up this Scout. Jim agreed so the search was on for a better Scout to start the project out with.



After checking around for several weeks(and picking up a few parts rigs along the way) we came upon this 1968 Scout 800 that had spent most of its life on a ranch and only had 19000 original miles. The body was in decent shape and overall was a real good Scout to start the build on.




Attached Images
File Type: jpg 024.JPG (94.0 KB, 18335 views)
File Type: jpg 025.JPG (83.3 KB, 18825 views)
File Type: jpg 026.JPG (83.1 KB, 17710 views)
File Type: jpg 028.JPG (41.4 KB, 17450 views)
File Type: jpg 029.JPG (67.3 KB, 17576 views)
File Type: jpg ORIGINALJIMSCOUT.JPG (100.2 KB, 30557 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 12-28-2012 at 12:02 PM..
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 02:25 PM   #2
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

Tear-down of the donor Scout began immediately.





We believe this is to be the original distributor cap as the odometer only showed 19000 miles.



With the bulk of the parts that we we're not going to use discarded and out of the way we were ready to begin the build up.



All brackets and such were cut off the frame that we were not going to be reusing.





The body was moved out back while work on the chassis began.



Attached Images
File Type: jpg 062.JPG (75.7 KB, 17756 views)
File Type: jpg 066.JPG (79.1 KB, 17423 views)
File Type: jpg 076.JPG (51.0 KB, 17307 views)
File Type: jpg 077.JPG (64.5 KB, 17461 views)
File Type: jpg 078.JPG (70.8 KB, 17343 views)
File Type: jpg 080.JPG (64.7 KB, 17464 views)
File Type: jpg 082.JPG (64.8 KB, 314 views)
File Type: jpg 009.JPG (74.6 KB, 17217 views)
File Type: jpg 010.JPG (70.0 KB, 17345 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 02:57 PM   #3
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

We started out with three main components - a GM 4.3 v6 longblock, a B&M GM 700r4 transmission and a Jeep version of the Dana 300.



We ordered up an older version of the 4.3 with a mild cam and provisions for a mechanical fuel pump since we were going with a carburetor.



The 4.3 was dressed up with a set of shorty headers, edelbrock intake manifold and a Holley 390cfm 4bbl carb. Advanced adapters motor mounts were used for engine mounting.



A whole slew of parts was gathered up including new leafsprings for front and rear and a CPT reverse shackle kit.



The frame itself was going to need the front crossmember relocated forward so as to give the v6 engine room to fit nicely in the engine compartment.





With the frame back in the shop mock-up of the suspension began.



CPT Scout 80/800 springs from our suspension system were used in the rear of the Scout.



For the front suspension we used some Rough Country 2.5" lift Scout II front springs with a couple of the leafs removed since the GM v6 weighs considerably less than a IH v8 engine.



Attached Images
File Type: jpg 033.JPG (60.2 KB, 18506 views)
File Type: jpg 034.JPG (58.9 KB, 17958 views)
File Type: jpg 035.JPG (66.1 KB, 18842 views)
File Type: jpg 037.JPG (62.5 KB, 18303 views)
File Type: jpg 036.JPG (70.3 KB, 17686 views)
File Type: jpg 038.JPG (58.4 KB, 17251 views)
File Type: jpg 039.JPG (56.0 KB, 20878 views)
File Type: jpg 065.JPG (63.2 KB, 21382 views)
File Type: jpg 067.JPG (55.9 KB, 18825 views)
File Type: jpg 068.JPG (68.4 KB, 20267 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 12-28-2012 at 11:00 AM..
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 03:12 PM   #4
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

With the mockup of the basic suspension complete we brought the body back in and removed the front fenders and grill.



Next the front radiator core support was carefully cut out.





Once complete the front support will be moved forward and reattached.



The body was then lowered back onto the rolling chassis.



The engine and transmission combination was readied for install.









Attached Images
File Type: jpg 001.JPG (54.0 KB, 17029 views)
File Type: jpg 002.JPG (54.6 KB, 16994 views)
File Type: jpg 003.JPG (53.5 KB, 16935 views)
File Type: jpg 004.JPG (50.3 KB, 16916 views)
File Type: jpg 006.JPG (55.8 KB, 17400 views)
File Type: jpg 077.JPG (63.9 KB, 17530 views)
File Type: jpg 080.JPG (77.6 KB, 16882 views)
File Type: jpg 081.JPG (63.7 KB, 16779 views)
File Type: jpg 082.JPG (69.1 KB, 16871 views)
File Type: jpg 085.JPG (75.1 KB, 16697 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 03:45 PM   #5
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

With the engine located the front radiator core support is put back in place.



The radiator got installed next.



With the radiator installed the electric fan can then be fitted to check for overall fan clearance.



Next up the interior was going to get refinished so removal of the dash was needed. Upon removal we found some critter had made the Scout home.





Both michael and Darren spent several hours sanding the Scout's interior.





All surfaces that were sanded were then sprayed with a metal primer.





The inner fenders then got sprayed with rubberized undercoating.



Attached Images
File Type: jpg 086.JPG (75.5 KB, 17247 views)
File Type: jpg 088.JPG (69.8 KB, 16862 views)
File Type: jpg 089.JPG (71.5 KB, 17779 views)
File Type: jpg 135.JPG (70.0 KB, 16718 views)
File Type: jpg 137.JPG (66.8 KB, 16691 views)
File Type: jpg 143.JPG (53.5 KB, 17316 views)
File Type: jpg 145.JPG (41.3 KB, 16562 views)
File Type: jpg 146.JPG (32.7 KB, 16550 views)
File Type: jpg 001.JPG (66.4 KB, 354 views)
File Type: jpg 004.JPG (87.0 KB, 16788 views)
File Type: jpg 005.JPG (74.3 KB, 16653 views)
File Type: jpg 001a.JPG (66.4 KB, 19165 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 12-28-2012 at 11:02 AM..
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 04:17 PM   #6
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

The interior was also sprayed with primer after being sanded down.



Taped and all ready to be sprayed with a few layers of liner.



We like to use a product called lizard skin. There are two formulas, one for sound deadening and the other is a ceramic coating. You don't have to apply both but we like to for the best results.



Here you can see Darren applying one of several coats of lizard skin.





Last a top coat of grey paint is applied for the best in uv protection.



The inside of the fenders also get the same royal treatment. Sanding, primer and then undercoating.





Next up was the install of an electric wiper system. All Scout 80 and 800's came with vacuum wipers so this is a huge improvement over stock.



With the dash reinstalled there is ample room for the electric wiper kit.



A new gauge package was also installed to check for fit.

Attached Images
File Type: jpg 010.JPG (67.0 KB, 16643 views)
File Type: jpg 011.JPG (50.2 KB, 16741 views)
File Type: jpg 031.JPG (60.4 KB, 17315 views)
File Type: jpg 044.JPG (71.5 KB, 16627 views)
File Type: jpg 045.JPG (84.0 KB, 16859 views)
File Type: jpg 046.JPG (70.2 KB, 18640 views)
File Type: jpg 048.JPG (99.5 KB, 16588 views)
File Type: jpg 051.JPG (73.5 KB, 20322 views)
File Type: jpg 058.JPG (84.1 KB, 17108 views)
File Type: jpg 059.JPG (61.9 KB, 18188 views)
File Type: jpg 064.JPG (67.5 KB, 16662 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-27-2012, 04:40 PM   #7
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

The inside of the halfcab also received several layers of lizard skin.



Next up was dealing with the front shocks and steering.






To make room for a Scout II power steering box the front support had to be modified for extra clearance.



Same with the inner fender. Instead of leaving a gaping hole around the steering column Darren fabricated a nice cover to keep water and mud out of the engine compartment.



A set of bare wheels was installed to check for alignment and for tierod and draglink clearance.





One of the other upgrades jim wanted was a single fuel tank instead of the factory dual tanks that all Scout 80 and 800's had. For the filler it was decided to install it in the rear driver tail cap behind the license plate.



We used a 15 gallon fuel tank and mounted it in the rear of the Scout.



Attached Images
File Type: jpg 066.JPG (84.4 KB, 16822 views)
File Type: jpg 098.JPG (35.4 KB, 16559 views)
File Type: jpg 099.JPG (41.0 KB, 17497 views)
File Type: jpg 100.JPG (69.3 KB, 20502 views)
File Type: jpg 101.JPG (68.8 KB, 16558 views)
File Type: jpg 138.JPG (76.2 KB, 17152 views)
File Type: jpg 139.JPG (82.1 KB, 16664 views)
File Type: jpg 307.JPG (61.8 KB, 17327 views)
File Type: jpg 308.JPG (36.8 KB, 17199 views)
File Type: jpg 309.JPG (40.0 KB, 16204 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 11:29 AM   #8
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

More mockup's of various components continued. Center console, seat brackets, shifters, etc.



A Scout II throttle pedal assembly was modified and installed.



A B&M megashifter was installed to go with the B&M 700r4 transmission.



At the time of this build it seemed to be Scout 80/800 season around here with all the builds!



A simple yet effective front bumper was fabricated for the Scout.







A hydraulic btl hood strut kit from Isa's IH was installed.



Since the Scout had power steering it was decided to go with hydroboost for a very effective braking system.

Attached Images
File Type: jpg 310.JPG (55.1 KB, 17457 views)
File Type: jpg 311.JPG (54.5 KB, 17427 views)
File Type: jpg 312.JPG (72.1 KB, 16858 views)
File Type: jpg 357.JPG (44.4 KB, 16720 views)
File Type: jpg 397.JPG (67.5 KB, 16637 views)
File Type: jpg 398.JPG (54.6 KB, 16337 views)
File Type: jpg 399.JPG (50.3 KB, 17820 views)
File Type: jpg 401.JPG (45.4 KB, 16596 views)
File Type: jpg 402.JPG (76.5 KB, 19352 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 11:57 AM   #9
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

Darren fabricated a custom headbar that could also support the shoulder type seatbelts.





A multiple holed tab was made so that the overall height of the built could be adjusted if needed.




The stock Scout seat bases had to be modified in order to fit the corbeau seats. You can also see the other half of the seatbelt mounted to the floor.





The driver side seatbase was a little easier to modify due to the way its designed.



Darren fabricated a rear bumper to match the front.



A class 3 trailer hitch was incorporated into the rear bumper.





2" square 1/4" walled steel was mounted deep inside the frame rails for the ultimate in strength.

Attached Images
File Type: jpg 405.JPG (43.5 KB, 16272 views)
File Type: jpg 407.JPG (44.6 KB, 16094 views)
File Type: jpg 404.JPG (63.4 KB, 16257 views)
File Type: jpg 408.JPG (78.9 KB, 16828 views)
File Type: jpg 410.JPG (75.9 KB, 16949 views)
File Type: jpg 411.JPG (73.9 KB, 16108 views)
File Type: jpg 415.JPG (57.4 KB, 17510 views)
File Type: jpg 416.JPG (43.5 KB, 16265 views)
File Type: jpg 418.JPG (51.7 KB, 16342 views)
File Type: jpg 413.JPG (66.8 KB, 16024 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 12:18 PM   #10
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

Back to the shoulder bar with the halfcab removed you can see the additional mount to the bulkhead.







With the bulk of the fabrication done the body was removed one last time to finish up a few things on the chassis and get under the body to wash and undercoat it.









With that complete the Scout was loaded onto a trailer.



And hauled off for a fresh coat of paint.

Attached Images
File Type: jpg 423.JPG (73.2 KB, 16410 views)
File Type: jpg 424.JPG (33.1 KB, 15923 views)
File Type: jpg 425.JPG (77.6 KB, 16026 views)
File Type: jpg 426.JPG (81.1 KB, 21166 views)
File Type: jpg 427.JPG (70.2 KB, 15971 views)
File Type: jpg 428.JPG (53.9 KB, 15831 views)
File Type: jpg 429.JPG (73.5 KB, 15790 views)
File Type: jpg 446.JPG (90.0 KB, 15823 views)
File Type: jpg 447.JPG (74.5 KB, 15910 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 12:41 PM   #11
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

A short time later the Scout was back from paint.



Wiring was next on the Scout.





At this point lots of little things were being performed on the Scout.





The license plate bracket was a flip design that allowed access to the fuel tank filler.



With the front bumper powdercoated and installed with the hella lights things were really starting to come together.



The overall stance of the Scout looked real good with the new wheels and tires.





Attached Images
File Type: jpg 047.JPG (63.9 KB, 15991 views)
File Type: jpg 048.JPG (80.3 KB, 15814 views)
File Type: jpg 049.JPG (38.9 KB, 15745 views)
File Type: jpg 063.JPG (63.5 KB, 15942 views)
File Type: jpg 064.JPG (87.3 KB, 15708 views)
File Type: jpg 066.JPG (54.1 KB, 15705 views)
File Type: jpg 068.JPG (61.3 KB, 15933 views)
File Type: jpg 070.JPG (60.0 KB, 15584 views)
File Type: jpg 072.JPG (71.9 KB, 15809 views)
File Type: jpg 074.JPG (65.8 KB, 16159 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 12:54 PM   #12
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

First look with the Scout sporting its freshly painted halfcab.



Another view from up above. You can see the guys behind the Scout discussing the tire rack.



With hydroboost for brakes and a remote reservoir for the power steering pump there were quite a few hoses to make for this project.



To keep the hoses from getting baked by the exhaust Darren took the time to fabricate a heat shield.





Wiring, speedo cable, shifters, etc were finished up underneath.





With the shoulder bar freshly powder coated it was installed for the last time.



Speakers were installed into the doors as part of the sound system.



In the midst of stereo equipment being wired up and installed.



For the coldest of days seat heaters were installed and wired into the electrical system.

Attached Images
File Type: jpg 108.JPG (54.7 KB, 15766 views)
File Type: jpg 112.JPG (54.4 KB, 15578 views)
File Type: jpg 114.JPG (69.1 KB, 15773 views)
File Type: jpg 115.JPG (78.0 KB, 15535 views)
File Type: jpg 116.JPG (75.2 KB, 15549 views)
File Type: jpg 117.JPG (83.3 KB, 15548 views)
File Type: jpg 119.JPG (76.7 KB, 15546 views)
File Type: jpg 120.JPG (69.5 KB, 15536 views)
File Type: jpg 122.JPG (38.3 KB, 15506 views)
File Type: jpg 123.JPG (72.4 KB, 15430 views)
File Type: jpg 124.JPG (60.2 KB, 15492 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 01:10 PM   #13
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

The next few pictures show how the undercarriage came out once everything was installed.













Some final detail work was performed to give the paint its final polish and a protective wax coating.



Another up above picture of what was in the shop that day.



More wiring of the dash was yet to be completed.



A custom switch panel box was fabricated for the seat heater switch's.



Chad seen buttoning up the transmission shifter.



For easy access the stereo is mounted inside the center console.

Attached Images
File Type: jpg 128.JPG (82.3 KB, 15406 views)
File Type: jpg 129.JPG (79.3 KB, 15469 views)
File Type: jpg 130.JPG (83.4 KB, 15403 views)
File Type: jpg 131.JPG (74.0 KB, 15393 views)
File Type: jpg 132.JPG (86.9 KB, 15373 views)
File Type: jpg 133.JPG (76.8 KB, 15366 views)
File Type: jpg 134.JPG (54.6 KB, 15296 views)
File Type: jpg 135.JPG (44.9 KB, 15324 views)
File Type: jpg 136.JPG (83.2 KB, 15336 views)
File Type: jpg 148.JPG (79.2 KB, 15358 views)
File Type: jpg 149.JPG (75.6 KB, 15329 views)
File Type: jpg 150.JPG (71.5 KB, 15326 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 12-28-2012, 01:26 PM   #14
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,178
Default Re: Jim's 1968 Scout 800

Stereo installed.



The gauge panel had a decent length pigtail made for easy access to behind the dash.



And with that jim's Scout was complete. Obviously there were countless hours of work performed that we did not show you but this hopefully gives you an inside look into what it takes to build a custom Scout.























Attached Images
File Type: jpg 151.JPG (62.3 KB, 15388 views)
File Type: jpg 153.JPG (77.4 KB, 15354 views)
File Type: jpg 364.jpg (85.4 KB, 15677 views)
File Type: jpg 366.jpg (72.8 KB, 15628 views)
File Type: jpg 370.jpg (72.5 KB, 15541 views)
File Type: jpg 371.jpg (69.4 KB, 15988 views)
File Type: jpg 372.jpg (87.1 KB, 15243 views)
File Type: jpg 373.jpg (85.3 KB, 15343 views)
File Type: jpg 382.jpg (69.1 KB, 15213 views)
File Type: jpg 383.jpg (82.7 KB, 15246 views)
File Type: jpg 384.jpg (74.4 KB, 15249 views)
File Type: jpg 385.jpg (68.9 KB, 15155 views)
File Type: jpg 386.jpg (74.5 KB, 15167 views)
File Type: jpg 388.jpg (66.6 KB, 15212 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 01-07-2013, 02:21 PM   #15
DocG
Senior Member
 
DocG's Avatar
 
Join Date: Dec 2012
Member Number: 5287
Posts: 164
Default Re: Jim's 1968 Scout 800

Great looking truck guys! I know its not IH, (or Ford) but I love the modern engine in the truck. What a great way to have a "brand new" 40+ y/o truck. The yellow looks great on this body style!

I do not like diesels, but I have been driving a tata pick up truck with a plucky little diesel in it and have been dreaming about putting one in an 80/800. I'm sure there is a better small diesel engine (Nissan perhaps in keeping with history) that would be better then whoever makes the tata (india it think?)

what do think Jeff? Someone out there must want a modern diesel Scout...
DocG is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 05:46 PM.