IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Basic Tech Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 02-09-2019, 08:32 AM   #1
Richard
Senior Member
 
Join Date: Mar 2009
Member Number: 969
Location: So Cal
Posts: 218
Default Steering blues!

I have a 77 SII, 196-1bbl, 4sp, D20,d44's, p/s, p/b, 2 inch lift with 2 inch body lift. - Basically Stock.
Looking for some thoughts re: the power steering box and "any" adjustments that are possible. I have just a tiny bit of "play" in my steering when driving. Put the Scout on jack stands, took off the front tires, and played with the steering (back and forth) to see exactly where the "play" is. The Scout drives just fine at 60-65 mph, but I would like to see if I can get the "play" to go away. Frame is not cracked, and I have steel plate on both sides of frame where steering box bolts on. I switched from the stock rag joint to the older "bell" steering coupler (feels a little bit firmer/sturdier)

Seems that the steering box has about a 1/4 inch play from steering column to wheel rotors. At the steering wheel, maybe 1 1/2 inches either way from center. I notice that there is an adjusting nut and lock nut on top of the steering box and was curious: what is this adjusting nut for? Is it possible to "tighten up" the looseness in the steering with this adjusting nut, or is it for something else? any thoughts are appreciated.
Richard is offline   Reply With Quote
Old 02-09-2019, 02:36 PM   #2
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 4,098
Default Re: Steering blues!

Worn ball joints, tie rod ends, and drag link ends are all known sources of steering slop in these Scouts, and items that should be inspected/replaced before messing with the adjustment on the steering gear box. From what little I know, that adjustment is not something to be trifled with lightly. Its easy to do more harm than good there. The suspension and body lifts have also changed the handling characteristics of the vehicle. The center of gravity is higher for one thing.
Is the front sway bar that ties the frame sides together still in place? The bell joint you retrofitted is probably better than a rotten, nearly disintegrated rag joint, but I dare say not as sturdy as a Borgeson universal steering joint would be. IH Parts here has several other products intended to add rigidity to the frame in lieu of a missing front sway bar.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram SLT 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500/8800# GVWR/12K# winch
Hooty - '74 SII 4x4 - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x11.5 TSLs/33g Fuel/8K# winch
Lemuel - '73 1210 Reg Cab 4x4 Camper Special - 304/TF727/NP205/4.09 FA25 & 4.10 RA16 - "Pull Lemuel, pull!"
Mongo - '71 1210 Reg Cab 2WD - 345/TF727/4.10 RA17 - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 06:57 PM.