Click Here!

Go Back   IH PARTS AMERICA > IH Parts America Area > IH Parts America Product Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Thread Tools Display Modes
Old 10-28-2019, 01:28 PM   #1
Junior Member
Join Date: Jan 2019
Member Number: 9577
Location: Minnesota
Posts: 1
Question 71' 800 CPT Crawler Lift Kit - Specs


The PPO installed the CPT Crawler kit (awesome) (Dana 44 rear, 30 front. V8)

The PPO also bent the front of the frame (not awesome).

The passenger side front frame is 1.125" lower than the drivers side. Checked the diagonals and doesn't measure out to be out of whack.

I have the spec book for the 800 but it give the height of the front of the frame stock.

Anyone have the floor to top of the frame height on a 800 with the same specs as mine?
Attached Images
IH800_GreyDuck is offline   Reply With Quote
Old 10-28-2019, 02:45 PM   #2
Senior Member
Join Date: Jul 2018
Member Number: 9303
Posts: 106
Default Re: 71' 800 CPT Crawler Lift Kit - Specs

Looks to me like that new front cross member was not welded in properly and that is likely where the frame has twisted.

Pull the axle out, put stands under the frame sides and cut that cross member out and get a proper one welded back in.
Winchested is offline   Reply With Quote

800, cpt, crawler, frame, suspension

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 12:09 PM.