IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > IH Parts America Area > IH Parts America Build-Ups
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 06-29-2007, 05:57 AM   #46
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

We tore the engine down the rest of the way in order to swap the camshaft in, have the rotating assembly rebalanced, and overall inspect it since we didn't build this engine. We sent the rotating assembly off to the machine shop for balancing and the cylinder heads for inspection. Good thing we did because the connecting rods were no good and needed replacement, the valve springs were weak so those were replaced, and a 3 angle valve job was performed since several of the valves were leaking. Both rocker arm assemblies were also replaced as they were only cleaned up and reinstalled but were clearly worn out. And after finding the rust formation behind the cam plate of this brand new engine only then did we know that this engine would not have lasted long at all.









Amazing how much dirt came out of this "ready to run" engine(that was a clean tray when we started).

Attached Images
File Type: jpg IMG_0443.JPG (102.6 KB, 2135 views)
File Type: jpg IMG_0445.JPG (69.1 KB, 2108 views)
File Type: jpg IMG_0447.JPG (111.9 KB, 2102 views)
File Type: jpg IMG_0448.JPG (134.6 KB, 2118 views)
File Type: jpg IMG_0457.JPG (136.6 KB, 2119 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:03 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 06:06 AM   #47
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

We modified the oil pan by removing the 'hump' from the pan. This allows for extra capacity and makes for a better oil supply to the oil pick-up assembly.









Looks like 'baby poo' in this oil pump???? Not sure who previously rebuilt this engine but I wouldn't let them touch my briggs&stratton lawn mower engine.



Finally the bottom end was reassembled. We used nos factory steel head gaskets to help with engine compression.



Attached Images
File Type: jpg IMG_0450.JPG (105.6 KB, 2289 views)
File Type: jpg IMG_0453.JPG (112.3 KB, 2240 views)
File Type: jpg IMG_0454.JPG (97.8 KB, 2102 views)
File Type: jpg IMG_0455.JPG (115.5 KB, 2489 views)
File Type: jpg IMG_0458.JPG (151.6 KB, 2263 views)
File Type: jpg IMG_0460.JPG (132.0 KB, 2086 views)
File Type: jpg IMG_0461.JPG (136.0 KB, 2089 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:07 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 06:18 AM   #48
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

With the engine all buttoned up we started bolting on the accessories.





This hi-torque starter Should crank this engine over just fine.



The front shocks arrived so we bolted those on.



Since the throw-out bearing will not be easily serviceable we installed a hose to the outside of the bellhousing so that the bearing can get greased with ease.



We installed the clutch, bellhousing, and slid on the transmission and then dropped the assembly onto the frame.





Attached Images
File Type: jpg IMG_0462.JPG (117.1 KB, 2104 views)
File Type: jpg IMG_0465.JPG (123.0 KB, 2097 views)
File Type: jpg IMG_0467.JPG (112.9 KB, 2072 views)
File Type: jpg IMG_0466.JPG (73.0 KB, 2091 views)
File Type: jpg IMG_0469.JPG (133.7 KB, 2138 views)
File Type: jpg IMG_0471.JPG (120.8 KB, 2070 views)
File Type: jpg IMG_0472.JPG (149.9 KB, 2050 views)
File Type: jpg IMG_0476.JPG (140.2 KB, 2354 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:13 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 07:06 AM   #49
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

After installing the atlas transfer case, drivelines, and ceramic coated exhaust we were finally ready to bolt down the body. Pics of the chassis pretty much done and ready for the body to be bolted down.



















Attached Images
File Type: jpg IMG_0481.JPG (135.9 KB, 2371 views)
File Type: jpg IMG_0482.JPG (125.4 KB, 2222 views)
File Type: jpg IMG_0483.JPG (146.8 KB, 2096 views)
File Type: jpg IMG_0484.JPG (140.4 KB, 2086 views)
File Type: jpg IMG_0485.JPG (118.4 KB, 2053 views)
File Type: jpg IMG_0486.JPG (126.4 KB, 2093 views)
File Type: jpg IMG_0488.JPG (144.0 KB, 2059 views)
File Type: jpg IMG_0491.JPG (94.1 KB, 2067 views)
File Type: jpg IMG_0498.JPG (62.1 KB, 2019 views)
File Type: jpg IMG_0499.JPG (140.9 KB, 2050 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:21 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 07:21 AM   #50
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

A few more shots of the chassis.









Attached Images
File Type: jpg IMG_0493.JPG (134.8 KB, 2090 views)
File Type: jpg IMG_0503.JPG (81.9 KB, 2022 views)
File Type: jpg IMG_0504.JPG (118.2 KB, 2046 views)
File Type: jpg IMG_0505.JPG (127.0 KB, 202 views)
File Type: jpg IMG_0507.JPG (85.5 KB, 2094 views)
File Type: jpg IMG_0508.JPG (78.5 KB, 2019 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:36 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 07:27 AM   #51
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

We dropped the body down onto the chassis for the final time.



















Attached Images
File Type: jpg IMG_0509.JPG (126.8 KB, 2066 views)
File Type: jpg IMG_0510.JPG (153.1 KB, 2089 views)
File Type: jpg IMG_0512.JPG (144.9 KB, 2021 views)
File Type: jpg IMG_0514.JPG (124.5 KB, 2064 views)
File Type: jpg IMG_0516.JPG (147.5 KB, 2017 views)
File Type: jpg IMG_0518.JPG (137.7 KB, 2090 views)
File Type: jpg IMG_0519.JPG (126.4 KB, 2035 views)
File Type: jpg IMG_0520.JPG (126.3 KB, 2069 views)
File Type: jpg IMG_0521.JPG (107.7 KB, 2017 views)
File Type: jpg IMG_0522.JPG (122.9 KB, 2032 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:49 AM..
ihpartsjeff is offline   Reply With Quote
Old 06-29-2007, 07:32 AM   #52
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

And then dropped in the roll cage.





Attached Images
File Type: jpg IMG_0523.JPG (162.9 KB, 2078 views)
File Type: jpg IMG_0524.JPG (153.1 KB, 4407 views)
File Type: jpg IMG_0525.JPG (160.6 KB, 3277 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 11-06-2013 at 08:51 AM..
ihpartsjeff is offline   Reply With Quote
Old 07-01-2007, 11:03 PM   #53
crazy4ih
Junior Member
 
Join Date: Jan 2007
Member Number: 38
Posts: 14
Default Re: LD`s Custom Scout II

Jeff, that is some sick work. That chassis looks killer. Nice job. This is what my Scout dreams of being.
crazy4ih is offline   Reply With Quote
Old 07-02-2007, 10:06 AM   #54
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

Quote:
Originally Posted by crazy4ih View Post
Jeff, that is some sick work. That chassis looks killer. Nice job. This is what my Scout dreams of being.
Thanks bryan. Darren's been doing a phenomenal job building and assembling this rig. Although I have put in my two cents worth and most of the designing of the vehicle the real credit should go to Darren as he has done most of the work on this project. His fab skills and analism(is that a even word??? ) towards detail is far above most out there.
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 07-02-2007, 08:29 PM   #55
Jason Lyon
Junior Member
 
Join Date: Feb 2007
Member Number: 81
Posts: 1
Default Re: LD`s Custom Scout II

Jeff, my hatís off to you. I have built hotrods and sport trucks that have won sema awards and I have had those same vehicles on the covers of various magazines. Your eye for detail and drive for modernizing International motor and Scout suspensions is a blessing for this community.

I hope that your craftsmanship will push International owners to step up to the plate and take pride in their vehicles. It is a shame that the scouts are, for lack of better terms, ďthe red headed step children of 4x4.Ē from mismatched body panels, to fenders that look like someone trimmed it with a cutting torch, its no wonder that scouts donít get the respect that they deserve.

It is about time that scouts replace the fj40s on magazine covers or that early Bronco owners start giving scouts some respect, after all the Scout it the reason they exist.

Jeff, keep up the good work and keep raising the bar!
Jason Lyon is offline   Reply With Quote
Old 07-03-2007, 10:25 AM   #56
INFINIT
Junior Member
 
Join Date: Feb 2007
Member Number: 88
Posts: 3
Default Re: LD`s Custom Scout II

Quote:
Originally Posted by ihojeff View Post

Looks like 'baby poo' in this oil pump???? Not sure who previously rebuilt this engine but I wouldn't let them touch my briggs&stratton lawn mower engine.
Good thing you and my bro agreed on pulling everything apart and inspect.you guys basically used nothing from the old project. I expected all this when we pulled the project last year.

I spoke to my bro about his plan for a sound system and wouldn't you know it, he's planning a mac system as in mcintosh. He's a mac nut but I can't believe he's doing a mac system for his Scout. IH and mac. As rare as they come. I was trying to talk him into alpine but he told me .
INFINIT is offline   Reply With Quote
Old 07-30-2007, 10:44 AM   #57
69scout
Junior Member
 
Join Date: Jan 2007
Member Number: 26
Location: denver, co
Posts: 14
Default Re: LD`s Custom Scout II

Where did you get those long spark plug wires and holders?
69scout is offline   Reply With Quote
Old 07-30-2007, 12:50 PM   #58
ihpartschad
IHPA General Manager
 
ihpartschad's Avatar
 
Join Date: Jan 2007
Member Number: 3
Location: Loma Rica, CA
Posts: 933
Default Re: LD`s Custom Scout II

livewire brand performance ignition wires - IH Parts America

You will have to ask luis where he got the holders, summit probably
__________________
Chad Maycroft
IH Parts America[/B][/SIZE]
CPT Crawler Proven Technology
ihpartschad is offline   Reply With Quote
Old 07-30-2007, 04:58 PM   #59
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: LD`s Custom Scout II

Quote:
Originally Posted by 69scout View Post
where did you get those long spark plug wires and holders?
Quote:
Originally Posted by ihpartschad View Post
livewire brand performance ignition wires - IH Parts America

You will have to ask luis where he got the holders, summit probably
Actually, those are msd wires. I forget where the wire holders were purchased from(possibly summit).
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 08-08-2007, 08:42 AM   #60
YellowIH
Junior Member
 
Join Date: Feb 2007
Member Number: 79
Location: Cookeville, TN
Posts: 4
Default Re: LD`s Custom Scout II

Nice work. Really impressive.
__________________
SSII'd 73 SII with RPT items.
YellowIH is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 04:10 AM.