IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Sewing Circle > Reader's Ride's
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 10-14-2018, 03:14 PM   #1
Gunfighter97
Senior Member
 
Gunfighter97's Avatar
 
Join Date: May 2018
Member Number: 9260
Location: The Communist West
Posts: 224
Default 1966 IH 1200a cold storage parts/future project

Ho har hum, this is the truck I cant decide if I like enough to keep relatively intact or not. Heres the story: I bought my 1965 1100 4x4 and have lived within 20 minutes of this truck for over 10 years. I remembered it not having moved since I noticed it over a decade ago, sitting boxed in the corner of the yard of a local shop, so I figured I'd ask about it. Long story short it has no title or papers and has been that way for over 25 years give or take. I didnt even have an opportunity to ask about buying parts before the shop owner offered to sell it to me for $400 for parts only and he'd help dig it out with the shop fork lift. I looked it over, no battery, no air filter, no rokers(otherwise complete engine), valve covers were on the floor inside the cab, body is more or less meh(cowl has rust/vents surprisingly ok/floor is bad/fenders and facia look patched/have rott/hood has rott), dash is nice omiting the vinyl. It didnt take me more than 30 seconds to decide to buy it since the windshield is near mint and I figured it would cost me more to get a new one. Heres what I know for sure:
-266 v8 dual rotten pipes
-Borg Warner T98 4speed (unsure if T98a or not)
-disabled column shift
-I beam front axle, D60 open diff rear
-drivable when parked(as meaningless as that is)
Here is where the fun begins, for now I take parts when I know whats there will work, I want to preserve everything else for a couple reasons: 1 so the next guy can use something, and or 2 The Comunist West, 5th gen resident as I am, is actively trying to imprison me for working with guns. Since I can only remember roughly 80million mandatory laws at once and we seem to be at right around 100million, I be leaving sooner or later, and I rekon If I wanted I could easily get a salvage title in another state. Since my CDO in regards to keeping things original is long gone as I think this truck was gutted atleast once, and also since the body aint that great I could build it into a rig somewhere inbetween flatbed beater and rock crawler or a scaled down ultra4 esque truck. I figure with the column shift I could put in an auto with the 266, add a t-case and d-44, some knobby tires and Bobs' your uncle.
Here's the bottom line, I want to preserve the mechanics and every time I look at it I'm overwhelmed. The engine has sat with no VCs or air cleaner some time starting in the last 25 years. The oil is chunky white. The shifer had been dismantled for the leaver around about a year before I got it. I came back by the shop and there it was proped in the corner, aparently they tried to replace the one in their fork lift but it was the wrong one so they gave it to me and I put it back in. I pulled the parking linkage out for my rig(consequently the half shafts also) they were a bit rusty, not too bad. The rad and heater core are original, system looks dry and theres a hose to nowhere. Electrics look salvageable, the original harnes has been modified but cleanly so. I will be ordering a LST for it, not sure what good it will do but just for shiz and giggles. The locks were all still on one key, I removed them to install in my other truck. Looks to have been "General Lee" orange.(no racism intended) anyways, since I will move with it one way or another I need to keep it in one hunk, Im just looking for advice on what to do and where to begin. I figure It could be a good off road toy for more extreme roads than what my other truck will see(I want to keep it nice) and might as well be a bit Mad Max at the same time. See pics of corpse for reference.
Edit: one last thing, when we moved it it was in gear with no shifter. We picked up the back end with the fork lift and wheeled it onto a car trailer, upon setting down it rolled about a foot. I have not pulled the plugs to specifically check free engine rotation, but im positive it does.... Probably.... Rotate.
Attached Images
File Type: jpg 20181014_150329_HDR.jpg (132.6 KB, 101 views)
File Type: jpg 20181014_150351_HDR.jpg (113.1 KB, 36 views)
File Type: jpg 20181014_150356_HDR.jpg (100.0 KB, 39 views)
File Type: jpg 20181014_150655.jpg (88.5 KB, 40 views)
File Type: jpg 20181014_150630_HDR.jpg (73.9 KB, 32 views)
File Type: jpg 20181014_150419_HDR.jpg (118.4 KB, 36 views)
File Type: jpg 20181014_150442_HDR.jpg (93.5 KB, 34 views)
File Type: jpg 20181014_150638_HDR.jpg (86.8 KB, 30 views)
File Type: jpg 20181014_150453_HDR.jpg (95.2 KB, 38 views)
File Type: jpg 20181014_150622_HDR.jpg (108.5 KB, 34 views)
File Type: jpg 20181014_150604.jpg (141.8 KB, 33 views)
File Type: jpg 20181014_150750.jpg (63.4 KB, 37 views)
File Type: jpg 20181014_150758.jpg (81.5 KB, 31 views)
File Type: jpg 20181014_150814.jpg (81.3 KB, 31 views)
File Type: jpg 20181014_150850.jpg (84.7 KB, 34 views)
File Type: jpg 20181014_150910.jpg (79.9 KB, 29 views)
File Type: jpg 20181014_150912.jpg (65.9 KB, 32 views)
__________________
Coming to you from behind enemy lines, in an unmarked barn, somewhere in The Communist West
(currently planning my escape)

1965 IH D11004x4 "Sherman"
1946 Dodge Job Rated half ton "Rusty"
1973 Fiat 850 Spider "il Cannoli"
Half of a dead 1958 Apache "Mad Dura-Max(to be)"

MEEEEEEEEEEERRY CHRISTMAAAS!!!!
RIP wallets everywhere.

Luke 2:11

Last edited by Gunfighter97; 11-06-2018 at 07:40 PM..
Gunfighter97 is offline   Reply With Quote
Old 11-06-2018, 07:36 PM   #2
Gunfighter97
Senior Member
 
Gunfighter97's Avatar
 
Join Date: May 2018
Member Number: 9260
Location: The Communist West
Posts: 224
Default Re: 1966 IH 1200a cold storage parts/future project

Alrighty, LST is here, lets unwrap this present lol!
Originated in NY shipped to:

Commonwealth Plan INC
% IHC
Oakland California
Railhead California

-Original FA10 still there
-HD front/rear springs (these might get swapped onto my 11004x4 not sure yet)
-Power brakes (I'm really sad thats gone, explains the short line out of the master, mounts are still there)
-Typical s-3 steering
-Two? Propeller shafts??? Not 4x4, IDK.
-Two front corner lamps(not sure if those are the side ones that are flush with the fender or what)
-Standard 11" 9 spring clutch(unknown if still there)
-V-266 engine(matching #)
-Increased cooling (three row maybe vs two?)
-T-4 3spd column shift tranny(gone)
-Original RA16 4.10 gear still there
-15 gallon tank(present but not installed)
-Left arm rest(ones there but dont think original)
-JR Dual King Size Mirrors
-Safety package??? Its solid steel body on frame with lap belts, how "safe" can it be exactly? Seems like putting lipstick on a pig but Im interested in what that is.
-Lastly about 9 lines of hard to read paint colors, including 2 different # oranges.
No mention of a pickup bed. Could it have shipped just cab and frame?
Anyways, I'm suprised its as intact as it is. I'm starting to like it.... That may be a bad thing... For my wallet....
__________________
Coming to you from behind enemy lines, in an unmarked barn, somewhere in The Communist West
(currently planning my escape)

1965 IH D11004x4 "Sherman"
1946 Dodge Job Rated half ton "Rusty"
1973 Fiat 850 Spider "il Cannoli"
Half of a dead 1958 Apache "Mad Dura-Max(to be)"

MEEEEEEEEEEERRY CHRISTMAAAS!!!!
RIP wallets everywhere.

Luke 2:11
Gunfighter97 is offline   Reply With Quote
Old 11-06-2018, 08:09 PM   #3
Gunfighter97
Senior Member
 
Gunfighter97's Avatar
 
Join Date: May 2018
Member Number: 9260
Location: The Communist West
Posts: 224
Default Re: 1966 IH 1200a cold storage parts/future project

Ok, new plan.... I might be slightly delirious right now but screw it. Keep it relatively original, bigger custom flatbed, 4x4 conversion while keeping it closer to the ground than my 1100, 5 speed manual, maybe non divorced t-case, and some towing stuff. My idea is a deployment rig for an OHV and a more "on road" heavy duty truck. I know I said harsh off roading earlier but I'm liking the idea of having a scout as well.... The IH addiction continues..... don't get me wrong, its still a parts truck right now, buuut I might start tinkering on it for fun
__________________
Coming to you from behind enemy lines, in an unmarked barn, somewhere in The Communist West
(currently planning my escape)

1965 IH D11004x4 "Sherman"
1946 Dodge Job Rated half ton "Rusty"
1973 Fiat 850 Spider "il Cannoli"
Half of a dead 1958 Apache "Mad Dura-Max(to be)"

MEEEEEEEEEEERRY CHRISTMAAAS!!!!
RIP wallets everywhere.

Luke 2:11
Gunfighter97 is offline   Reply With Quote
Old 11-18-2018, 07:07 PM   #4
Gunfighter97
Senior Member
 
Gunfighter97's Avatar
 
Join Date: May 2018
Member Number: 9260
Location: The Communist West
Posts: 224
Default Re: 1966 IH 1200a cold storage parts/future project

So in some tinkering and lookielooing I noticed theres a pto port on the passenger side of the tranny. I'm not sure what gear box is in it, when I put the shift leaver in it felt like a 4 speed but I didn't attach it properly so it spins round and round lol. Where would be the best angle to ID it from? Tunnel plate or underneith? I will be moving it sometime by the end of the year to tinker with it. Part of me is hoping its a five speed, I'm looking at the diferent options on them. It may not be an ih optioned tranny at all, who knows. In other news, I have confirmed that the crank case is FULL of water. Thats gona be fun to fix
__________________
Coming to you from behind enemy lines, in an unmarked barn, somewhere in The Communist West
(currently planning my escape)

1965 IH D11004x4 "Sherman"
1946 Dodge Job Rated half ton "Rusty"
1973 Fiat 850 Spider "il Cannoli"
Half of a dead 1958 Apache "Mad Dura-Max(to be)"

MEEEEEEEEEEERRY CHRISTMAAAS!!!!
RIP wallets everywhere.

Luke 2:11
Gunfighter97 is offline   Reply With Quote
Old 11-19-2018, 07:31 PM   #5
Gunfighter97
Senior Member
 
Gunfighter97's Avatar
 
Join Date: May 2018
Member Number: 9260
Location: The Communist West
Posts: 224
Default Re: 1966 IH 1200a cold storage parts/future project

Well, I crawled under it, seems to have 6 bolt pto covers on BOTH sides. Couldnt get it to shift, was thinking it might be the np 345 but it seems too big after lookimg it over again. Wont be able to get decent pics till I drag it onto the gravel with air in the tires. In the mean time, ima shower all the cob webs and bugs off me... YUK!
__________________
Coming to you from behind enemy lines, in an unmarked barn, somewhere in The Communist West
(currently planning my escape)

1965 IH D11004x4 "Sherman"
1946 Dodge Job Rated half ton "Rusty"
1973 Fiat 850 Spider "il Cannoli"
Half of a dead 1958 Apache "Mad Dura-Max(to be)"

MEEEEEEEEEEERRY CHRISTMAAAS!!!!
RIP wallets everywhere.

Luke 2:11
Gunfighter97 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 03:57 AM.