Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Basic Tech Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Thread Tools Display Modes
Old 05-12-2019, 11:46 AM   #1
Junior Member
Join Date: May 2019
Member Number: 9684
Posts: 1
Default 68 1200c options and info?

Hi all
Thanks for allowing me to join I have too
Many projects like most people
And one is this 68 1200c 2wd flat side truck
Vin says it has a 193hp motor and I have a few questions/offers

What trans would this truck have? It's an auto

What motor would this be as all I can find listed are 155hp

Dash says international gold key model ???

The truck seems very plush and flash for
An old IH I have ideas on things if I keep it

But like I said I have too many projects allready.
First hurdle and an offer some of you maybe interested in is
Fabbing up steel one piece 16 inch wheels I may make
Myself a set that accept the stock hub caps and IF there's enough interest I may well make up further sets to order

IF I keep it or don't part it Where can I buy restoration parts? mainly trim or interior ? The truck is actually pretty darn nice but would be awsome to
make it mint for a parts getter or weekend cruiser might even 4x4 it or and diesel swap ( another thing some here maybe interested in? ) so il be researching axle Orin's which may kill
The wheel fabbing idea but it's a nice truck pretty sure it's only been a cabover camper hauler
Thanks again smogmonster ( Lake Tahoe)

Last edited by Smogmonster; 05-12-2019 at 11:50 AM.. Reason: Info
Smogmonster is offline   Reply With Quote
Old 05-12-2019, 07:13 PM   #2
Scoutboy74's Avatar
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 4,233
Default Re: 68 1200c options and info?

Welcome to the forum. I moved your thread to a more appropriate section. The first step towards getting answers to some of your questions is to find the Line Setting Ticket, what IH called their vehicle build sheet. On some years of trucks, they can be found taped to the back side of the glove box liner. On others, they were taped to the passenger door A-pillar. On some others, they were taped to the cowl under the hood. If you can't find yours anywhere, or if you do find it and it's illegible, you can purchase a copy of it through IH Parts as long as you have your VIN handy. That ticket will list every major piece of equipment that was installed on your truck when it rolled down the line. That doesn't mean the truck still has all that stuff all these years later. The 193 hp rating is for a 304 engine. An original automatic for that era truck would be a Borg Warner unit.
Coal Trickle - '99 Dodge Ram SLT 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500/8800# GVW/12K# winch
Hooty - '74 SII 4x4 - 392/TF727/D20/3.73 D44's/Spartan FA/Powr-lok RA/33g Fuel
Lemuel - '73 1210 Reg Cab 4x4 CS - 304/TF727/NP205/4.09 FA25 & 4.10 RA16/6800# GVW - "Pull Lemuel, pull!"
Organ Donor - '72 1210 Reg Cab 2WD - seized 392/TF727/7500# GVW - "Use my body to keep you alive!"
Mongo - '71 1210 Reg Cab 2WD - 345/TF727/4.10 RA17/6100# GVW - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 07-25-2019, 08:57 AM   #3
Junior Member
Join Date: Jul 2019
Member Number: 9761
Location: St. Charles, IL
Posts: 1
Default Re: 68 1200c options and info?

There were some cool 1968 options. My Travelall came with a ton of factory and dealer installed options and I have been slowly performing a stock restoration because I recognized how rarely people ordered trucks with "high end" accessories in the late 60's. If you have the embossed door panels with the horizontal black/chrome strip, I've yet to see one recreated, so take good care of them or find a good set. The backing can go bad, but as long as the vinyl material is good, they can be re-done. I was able to get my seats reupholstered with original NOS material, which is pricey but still available. Do you have a bench or the folding center console option? Post some photos!

1968 1200C Travelall 4x4
1966 1200A Travelette 4x4 USAF
1963 1000 Travelall
1964 Scout 80 4x4
68Tall1200 is offline   Reply With Quote
Old 07-25-2019, 10:38 AM   #4
Senior Member
1975IH200's Avatar
Join Date: Dec 2008
Member Number: 731
Location: 3rd to last cave on the right
Posts: 599
Default Re: 68 1200c options and info?

Here is some 1968 Model 1200C info from IH.
Attached Images
File Type: pdf 1200C Spec Sheet.PDF (7.40 MB, 28 views)

My Junk --> 1975 "200HD" AWD Truck
My Cave location --> Western North Carolina
1975IH200 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 04:22 PM.