Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Axle Tech Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Thread Tools Display Modes
Old 11-23-2008, 11:50 PM   #1
Senior Member
Join Date: Jul 2008
Member Number: 528
Location: Chesterfield (St. Louis), MO
Posts: 144
Default carrier bearings, pt. 2

P.s.: the I-h manual gives two torque values for the pinion bearing preload, one lower for used bearings, and one higher (20-40 in.lbs.) for new bearings. On the other hand, the Yukon gear booklet gives just one value, the same as the lower (used bearings) value of the I-h manual. So, which should I use?

pineneedle is offline   Reply With Quote
Old 11-24-2008, 07:17 AM   #2
Administrator & Owner
ihpartsjeff's Avatar
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 44
Posts: 4,181
Default Re: carrier bearings, pt. 2

With new bearings I usually set them up with around 25 inch pounds of preload.

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
Binder Books
CPT - Crawler Proven Technology
ihpartsjeff is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 03:57 AM.