IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Sewing Circle > Reader's Ride's
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-19-2016, 03:49 PM   #11
71mtnscout
Senior Member
 
71mtnscout's Avatar
 
Join Date: Oct 2009
Member Number: 1369
Location: Menifee, CA
Posts: 522
Default Re: An Expedition Scout

Had to order a set of spindle nut kits today, the stuff that was on there is in pretty bad shape, so until parts come in I'm at a standstill on that. So I started to put the engine bay back together, I will have to do a bit of repair on the front wire harness but will run it while I build a new one. Used a porta-power between the engine and the bent inner drivers fender and pushed a lot of it out. Will do some hammer and dolly work on it tomorrow to try and straighten it out the rest of the way. Pulled the torn up seats and pedestals out and started on the drivers side since it still has the factory seat mount. I will have to modify one of the pedestals for the passenger side.
__________________
63 S80...."Beater"....
78 Honda CB750K
11 Ranger S/C 2wd
71mtnscout is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 11:15 AM.