View Single Post
Old 01-28-2018, 08:48 AM   #198
Robert Kenney
IHPA Tech Moderator
 
Robert Kenney's Avatar
 
Join Date: Aug 2008
Member Number: 543
Location: So Cal
Age: 49
Posts: 3,319
Default Re: 1964 Travelall and 1967 Travelette All Wheel Drive's

So I'm working on replacing the rear drums with a common available drum. All looks good accept for sourcing more RH thd lug nuts as I will be replacing the wheel studs. The left side are left hand thread from the factory.

My problem is the lug nut seat angle currently on the truck at all 4 corners. My lug nuts measure 108 degrees. WTF I included a drawing of mine and the common available ones. Is this normal for the big 6 International's? Everything available as far back as I can find would use 90 degree seats. I hope they are not modified. It is hard to tell from the wheel, what they are.
Name:  LUG NUTS.jpg
Views: 203
Size:  24.5 KB
__________________
Robert Kenney

“Don't lift until the fear of death over comes the fear of speed.” Author Unknown
Robert Kenney is offline   Reply With Quote