View Single Post
Old 03-13-2017, 01:42 PM   #2
Bill USN-1
F.I. Moderator
 
Bill USN-1's Avatar
 
Join Date: Jan 2007
Member Number: 7
Location: Oak Harbor, WA
Posts: 467
Default Re: Scout II 4-cyl EFI installations

Mark,
I have some pics of john's some where?
I'll have to look. It doesn't look any different then a carb and stock distributor.
The 4.3-5.7 throttle body are all the same. Only injector flow is different.
4.3 injectors for the 196

air cleaner base is standard 5 1/8 hole.
For johns I just swapped the 1bbl base for the IH 4bbl base.

For the dis, you can look at my 4cyl mini write up on bp.
I used the GM wasted spark dis from a 2.2 or 2.5 iirc.
The 2 coils just set on the ignition module and bolts to the engine.
Crank trigger plugs right in just like the distr pickup would.
__________________
Bill USN-1

COMMITED TO TEACHING PEOPLE THE "PROPER" WAY TO EFI
HAMILTON FUEL INJECTION
May be the answer to all your fuel injection needs!
Learn to do it right.
Bill USN-1 is offline   Reply With Quote