View Single Post
Old 03-20-2018, 09:33 AM   #16
Senior Member
Join Date: Feb 2008
Member Number: 415
Location: Quincy, MA
Posts: 260
Default Shifter Cover

Here's my shifter cover. Rather than incorporate a neutral safety switch, modify the detent on the factory TF727 transmission shifter, I bought a B&M megashifter PN# 80690 to use. I didn't like the shifter cover that B&M sends, so I made my own mount and cover out of 11 gauge CS diamond plate I had on hand. I incorporated a Behemoth T case cable shifter with it. Building my own keeps the shifter low. It also makes shifter cable routing a challenge. I've destroyed one cable so far. Cable routing out of the shifter hosing is important. You need plenty of room and no binding. I had to enlarge teh exit hole for the cable after this was built. The cable eye bronze sleeve was hitting it and broke the cable wire in two. Lessons learned, again.

Note, I also have a Moroso toggle switch panel. All switches are wired to and through relays under the cowl driver side for future use- electric fan override, auxiliary lights, etc. Currently no hot.
Attached Images
File Type: jpg 20180316_065224.jpg (45.4 KB, 155 views)
File Type: jpg 20180316_065231.jpg (56.6 KB, 167 views)
File Type: jpg 20180316_065235.jpg (54.1 KB, 144 views)
cbmind is offline   Reply With Quote