Carburetor Options?

BinderWalker

BinderWalker

New member
68 1200C V345E 4x4 4bbl
Application: A quick spin to the neighborhood garden and an occasional Sunday visit with the wife to church. This is a frame-off totally complete (every single nut & bolt) restoration including the Dana 40 & 60, 345E (that I pulled from a LS1700), T-16, & NP202. I hope to have it ready for Springfield / Ft Wayne 2026.
Question: The 4 (equally-sized) bores in the intake (spreadbore) that I have coupled with a manual choke, what carb should I be looking for?
 
Thanks Mr. Chappie, I found a little something from January of this year - but nothing in detail, and it was focused on a 2bbl. Yes, if you've got some info related to a 4bbl (especially the tuning specs), I'd be most interested. Thank you
 

Holley 8007 390 cfm tuning for a 345

I'm working to tune this carb to work well with a warmed over 345. The engine has an early square bore manifold with no smog, headers. The deck was shaved to move the piston crowns from .058 in the hole to .032. The heads are from an early 345e with no smog fittings and were surfaced .009"...
forums.ihpartsamerica.com
 
Let me try this again. It's obvious you've built some compression here & probably have something that could pull stumps.
All I'm looking for is the "ideal" 4-barrel carburetor for this motor I'm building.
Holley, quadrajet, fomoco, edelbrock, - I'm looking please for recommendations of manufacturer & size?? I apologize for the confusion
 
BinderWalker said:
68 1200C V345E 4x4 4bbl
Application: A quick spin to the neighborhood garden and an occasional Sunday visit with the wife to church. This is a frame-off totally complete (every single nut & bolt) restoration including the Dana 40 & 60, 345E (that I pulled from a LS1700), T-16, & NP202. I hope to have it ready for Springfield / Ft Wayne 2026.
Question: The 4 (equally-sized) bores in the intake (spreadbore) that I have coupled with a manual choke, what carb should I be looking for?
Click to expand...
what is your elevation of where you will be driving/ hanging out most of the time ?
 
I stand corrected, I was under the impression that this 390cfm was a 2bbl. (Sorry Mr. Chappie).
I'll check out your on-line catalog Jeff for this carb - and thanks again for the education.
 
You must log in or register to reply here.
Back
Top