Click Here!

Go Back   IH PARTS AMERICA > Members List
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Bill Bennett Bill Bennett is offline

Senior Member

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Rockwell67
    06-25-2014 01:41 PM
    Thank you for the response. I bought the carb several years ago when I just planned to get my t -all back on the road. Long story short 4x4 conversion new motor 2yrs later the rebuilt doesn't have the right parts. Is it common for Napa to scab parts together on these types of things assuming they will work?
  2. 1962300
    01-18-2014 07:36 PM
    Hi Bill,

    The spark plug wires are replaced and look SO much better routed with the clips you gave me. I have changed the filthy oil and those plug wires. I have gone through the carburetor and cleaned and refilled that oil bath air cleaner. I am now seeking a front shock mount lower mount/plate as mine broke. Replacing the oil sending unit tomorrow, and then if it is the gauge so be it. The gauge registers nothing at idle and at the quarter hash mark doing 40mph. I hooked up a mechanical gauge today and I have 20lbs at idle and 40lbs at a slightly higher rpm....so I'm not pulling the engine! I need to tackle the fuel gauge as well.
    Anyways....just wanted to say thanks again!!
  3. 1962300
    12-24-2013 11:36 AM
    Great. Want to let me know how much for four of the 2-plug wire holders?
    Can call me if easier at 562-533-2551

About Me

  • About Bill Bennett
    Torrance, CA
    retired - lithographer


Total Posts
Visitor Messages
General Information
  • Last Activity: 01-11-2020 03:12 PM
  • Join Date: 01-05-2009
  • Referrals: 1

All times are GMT -8. The time now is 04:12 AM.