IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Transmission Tech
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 11-08-2017, 10:26 AM   #1
Oil Scout
Junior Member
 
Join Date: Sep 2016
Member Number: 8373
Posts: 16
Question 392 Four Speed to 727?

I have the following:

1) vehicle model. Scout 800A
2) production date/or year model. 3/1970
3) two wheel drive or four wheel drive. Four
4) type of transmission (and transfer case if applicable). Four Speed, unsure of transfer case
5) if 4x4, which axles front and rear. Dana 44, 409 gears
6) which engine variation. V392E 1380624A
7) which ignition system variation. Petronix
8) which fuel system variation. Standard
9) which brake system variation. Front Disc Rear / Drum
10) non-oem modifications present which May impact a response.

Just beginning to consider changing to a Automatic transmission. Wondering of the pros/cons of this swap. So many threads on here, all great sources, but hard to find what I need without reading so many. If someone could just point me in the right direction of threads to read, I'm more than eager to do the reading.
Oil Scout is offline   Reply With Quote
Old 11-08-2017, 10:50 AM   #2
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,778
Default Re: 392 Four Speed to 727?

Is there a physical reason, like a gimpy clutch knee or similar condition that makes an automatic personally more preferable to a standard? What's going to be the primary use of the vehicle and what is the anticipated mix of paved versus non-paved driving in percentage?

I'm pretty familiar with the Chrysler Torqueflite A-727 autos that IH stuck behind their engines in these rigs. I have a healthy respect and appreciation for them. I've been inside them up to my elbows and armpits. I have them in both of the IH rust piles in my signature at the bottom. That said, in the case of my Scout which is a modified, but still pavement legal trail pig, I sometimes dream about it having the 4 speed with deep reduction 1st gear. The one with super low granny low that you'd only use for banana slug creepy crawls. So its basically a 3 speed manual with an occasional granny crawl. Yeah, I think I would prefer that one over the auto.

Reason why is, the auto trans, even when held in manual low, does not give much in the way of engine braking while negotiating a steep, rough decline, even when 4x4 low range is selected. The other advantage to having a standard trans is the possibility of compression starting the engine in the event of a drained battery, damaged starter or similar. Its one last chance to get the engine running and get yourself home under power in such a circumstance that you just can't do with a slushbox. Now, the one place where I feel an auto shines is when you're going up a steep, rough climb. Being able to just feather the throttle without having to inny/outty on the clutch pedal at the same time is nice. There are pro's and cons to either setup. If after reading all the above, your preference is still to go with the auto, I can provide you with more specific guidance as to what collection of parts will be necessary to acquire.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 05:11 AM.