IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > IH Parts America Area > IH Parts America Build-Ups
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 02-09-2011, 10:46 AM   #1
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Jamie's Diesel Scout II

We started doing some work on Jamie's 1978 Nissan diesel powered Scout back in January of 2010. This Scout started as a non-turbo powered diesel with stock suspension. We started initially with some suspension work as the current suspension had seen better days and will start the build here.

Here's the Scout in its stock form sitting on jack stands prior to the tear down.



As you can see the suspension was in sad shape with a broken main leaf spring.



Next the leaf spring were removed both front and rear.





Followed by the front spring hangers as a reverse shackle kit is going to be installed.







A lay out of the parts to be installed. We have 2.5" Rough Country leaf springs, CPT reverse shackle kit, CPT SUA Ubolt plate kit w/ 5/8" ubolts and some real smooth riding Bilstein shocks.



We always start the install of our reverse shackle kits by first assembling the front spring hangers.




This makes installation much easier and more accurate.

Attached Images
File Type: jpg IMG_4228.JPG (91.4 KB, 3846 views)
File Type: jpg IMG_4230.JPG (77.7 KB, 3676 views)
File Type: jpg IMG_4231.JPG (91.6 KB, 3565 views)
File Type: jpg IMG_4232.JPG (92.6 KB, 3497 views)
File Type: jpg IMG_4233.JPG (99.2 KB, 3552 views)
File Type: jpg IMG_4234.JPG (84.2 KB, 3418 views)
File Type: jpg IMG_4235.JPG (90.2 KB, 3601 views)
File Type: jpg IMG_4237.JPG (91.9 KB, 3819 views)
File Type: jpg IMG_4238.JPG (88.1 KB, 3411 views)
File Type: jpg IMG_4241.JPG (59.0 KB, 3348 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:25 AM..
ihpartsjeff is offline   Reply With Quote
Old 02-09-2011, 12:40 PM   #2
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

The front hangers are welded in and leaf springs installed.



Once installed everything is painted.





While we had the rear axle apart we fixed a issue known well to these Scout's and that is a bent axle housing.



An alignment bar is inserted thru the housing using the center line of the mock carrier bearings.



The end of the axle housing is cut off and then welded back on in order to put everything back on center.



With the housing straightened out it was reassembled and installed back in along with the new springs and shocks.



Here's the Scout with it's new upgraded suspension.



Attached Images
File Type: jpg IMG_4243.JPG (83.9 KB, 3367 views)
File Type: jpg IMG_4244.JPG (92.0 KB, 3324 views)
File Type: jpg IMG_4272.JPG (102.1 KB, 3335 views)
File Type: jpg IMG_4269.JPG (96.4 KB, 3875 views)
File Type: jpg IMG_4270.JPG (80.2 KB, 3476 views)
File Type: jpg IMG_4271.JPG (72.7 KB, 3535 views)
File Type: jpg IMG_4273.JPG (106.1 KB, 4155 views)
File Type: jpg IMG_4274.JPG (80.6 KB, 3786 views)
File Type: jpg IMG_4275.JPG (83.3 KB, 3328 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:31 AM..
ihpartsjeff is offline   Reply With Quote
Old 02-09-2011, 12:54 PM   #3
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

Then in July Jamie brought the Scout back up for another round of upgrades. The front bumper had a winch mount and guard added to it.



On-board air was installed.







Rocksliders, corner guards and a custom rear bumper were fabricated as well.





ARB's and lower axle gears were installed.





Here's the rear tire carrier all decked out with spare tire, gas can, hi-lift jack, chainsaw and license plate holder/light.



Looking real good with all it's new bumpers and sliders!

Attached Images
File Type: jpg IMG_4965.JPG (118.4 KB, 3931 views)
File Type: jpg IMG_4966.JPG (127.8 KB, 3422 views)
File Type: jpg IMG_4967.JPG (145.5 KB, 3436 views)
File Type: jpg IMG_4968.JPG (135.8 KB, 3555 views)
File Type: jpg IMG_4969.JPG (107.0 KB, 4400 views)
File Type: jpg IMG_4970.JPG (85.7 KB, 3282 views)
File Type: jpg IMG_4971.JPG (112.7 KB, 3553 views)
File Type: jpg IMG_4972.JPG (124.9 KB, 3374 views)
File Type: jpg IMG_4974.JPG (113.7 KB, 7859 views)
File Type: jpg IMG_4975.JPG (98.8 KB, 3296 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:38 AM..
ihpartsjeff is offline   Reply With Quote
Old 02-09-2011, 07:19 PM   #4
JohnnyC
Senior Member
 
JohnnyC's Avatar
 
Join Date: May 2009
Member Number: 1085
Location: Cheyenne, Wyoming
Age: 31
Posts: 166
Default Re: Jamie's Diesel Scout II

Who makes that front bumper, is it you guys?
__________________
John D. Colvin, USAFVET
JohnnyC is offline   Reply With Quote
Old 02-10-2011, 08:00 AM   #5
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

Quote:
Originally Posted by johnnyc View Post
who makes that front bumper, is it you guys?
In the first picture you can see how the bumper was originally. We cut the top hoop off of it and then added in the new hoop and winch mount. Otherwise yes we could make another one. If interested please call for a quote.
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 02-11-2011, 10:23 AM   #6
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

A few weeks ago jaime brought the Scout back to us for another round of upgrades. He also brought us this beautifully rebuilt sd33t Nissan turbo diesel to put in place of the aging naturally aspirated one that had racked up many a mile.



These engines come with new injector pumps and turbo and are full of oil as they have been test ran before being shipped.



The Scout was pulled into place and the swap began.





After a few hours the old power plant was hanging from the hoist.



With the new replacement engine nearby all needed parts were transferred from the old engine to the new.



With the parts transferred over the engine was readied for install.



Up and over!



And all bolted in!

Attached Images
File Type: jpg 082.JPG (150.9 KB, 5451 views)
File Type: jpg 083.JPG (126.3 KB, 3572 views)
File Type: jpg 084.JPG (129.3 KB, 3205 views)
File Type: jpg 088.JPG (141.7 KB, 3226 views)
File Type: jpg 089.JPG (128.4 KB, 3379 views)
File Type: jpg 090.JPG (123.1 KB, 3205 views)
File Type: jpg 091.JPG (138.3 KB, 3259 views)
File Type: jpg 093.JPG (139.8 KB, 3151 views)
File Type: jpg 094.JPG (79.8 KB, 3102 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:44 AM..
ihpartsjeff is offline   Reply With Quote
Old 02-11-2011, 10:41 AM   #7
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

With the new engine it was time for some performance goodies. Darren fabricated a custom cold air intake for the new engine as cold air flow into a diesel is critical in keeping exhaust gas temps in check.



Mandrel bent 3" exhaust tubing was used to creat the custom intake.





A hole is cut right behind the headlight area so that the cone air cleaner can get as much fresh cool air as possible.



A little closer look.



With the intake side of the engine done it was time to move onto the exhaust side. Darren fabbed up a nice free flowing 2 1/2" exhaust system that should keep things flowing efficiently.





A flex joint was installed to keep the exhaust system flexible within the chassis.



A nice big free flowing muffler will keep the noise levels in check while making as much power as possible.



The tail pipe was routed and trimmed to help prevent it from getting smashed. Between the bumper and side guard it is fully protected.

Attached Images
File Type: jpg 095.JPG (65.9 KB, 4224 views)
File Type: jpg 097.JPG (59.6 KB, 3262 views)
File Type: jpg 096.JPG (75.8 KB, 3255 views)
File Type: jpg 133.JPG (64.9 KB, 3161 views)
File Type: jpg 132.JPG (46.0 KB, 3155 views)
File Type: jpg 126.JPG (39.5 KB, 3155 views)
File Type: jpg 127.JPG (48.5 KB, 3390 views)
File Type: jpg 125.JPG (57.8 KB, 3333 views)
File Type: jpg 124.JPG (55.8 KB, 3141 views)
File Type: jpg 123.JPG (72.5 KB, 3308 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:50 AM..
ihpartsjeff is offline   Reply With Quote
Old 02-11-2011, 10:48 AM   #8
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

Another upgrade while the Scout was here was a 1800 watt power inverter.



1 gauge battery cables were carefully routed.



Something that we did not show you earlier was the air tank for the on-board air system so here it is.



Currently the Scout is waiting for a custom built fuel filter that will encompass a fuel heater, water separator and electric priming pump. More on the filter once it arrives and we get it installed so stay tuned!

Attached Images
File Type: jpg 134.JPG (48.0 KB, 3219 views)
File Type: jpg 128.JPG (52.7 KB, 3154 views)
File Type: jpg 129.JPG (68.5 KB, 3613 views)
File Type: jpg 142.JPG (94.6 KB, 3274 views)
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795

Last edited by ihpartsjeff; 10-23-2013 at 08:54 AM..
ihpartsjeff is offline   Reply With Quote
Old 12-07-2011, 06:53 PM   #9
Steve Grant
Senior Member
 
Join Date: Jun 2009
Member Number: 1165
Location: Lakewood, CO
Posts: 137
Default Re: Jamie's Diesel Scout II

I know late for posting this but nice work Jeff!
Steve Grant is offline   Reply With Quote
Old 12-21-2011, 11:04 AM   #10
xyz12383318
Junior Member
 
Join Date: Feb 2009
Member Number: 850
Posts: 7
Default Re: Jamie's Diesel Scout II

Do you have any more pictures of the rear rocker gaurds?
xyz12383318 is offline   Reply With Quote
Old 08-28-2012, 10:48 PM   #11
bbengard
Junior Member
 
Join Date: Mar 2012
Member Number: 4597
Posts: 23
Default Re: Jamie's Diesel Scout II

Where did you get that rear bumper and rear corner guards? I really like the chainsaw mount, I could use something like that.
bbengard is offline   Reply With Quote
Old 08-29-2012, 06:13 AM   #12
ihpartsjeff
Administrator & Owner
 
ihpartsjeff's Avatar
 
Join Date: Jan 2007
Member Number: 1
Location: Grass Valley, CA
Age: 43
Posts: 4,053
Default Re: Jamie's Diesel Scout II

Quote:
Originally Posted by bbengard View Post
where did you get that rear bumper and rear corner guards? I really like the chainsaw mount, I could use something like that.
Just as the build up says we fabricated these items in house. If you are interested in custom fabricated items like what seen here it is best to call our sales office to go over options and rough pricing.
__________________

Jeff Ismail
IH Parts America - Owner
IH Sierra Fall Rallye Event Coordinator
CPT - Crawler Proven Technology
(530)274-1795
ihpartsjeff is offline   Reply With Quote
Old 08-31-2012, 06:39 AM   #13
chico
Senior Member
 
Join Date: Feb 2009
Member Number: 936
Location: Lincoln C.A
Posts: 101
Default Re: Jamie's Diesel Scout II

Very very nice work Jeff and the gang.
chico is offline   Reply With Quote
Old 09-11-2017, 04:41 PM   #14
nick
Senior Member
 
Join Date: May 2011
Member Number: 3442
Location: lakeport, CA
Posts: 108
Default Re: Jamie's Diesel Scout II

What gears where added and what lift and final tire size? Thanks
nick is offline   Reply With Quote
Old 10-08-2017, 12:52 PM   #15
BigRed15
Junior Member
 
Join Date: Feb 2017
Member Number: 8582
Posts: 3
Default Re: Jamie's Diesel Scout II

Any updates on this fine ride? Thanks in advance!
BigRed15 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 07:42 PM.