IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Electrical Tech
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 12-28-2017, 08:31 PM   #1
scoutmax
Junior Member
 
Join Date: Jan 2017
Member Number: 8522
Posts: 15
Default Alternator problem 10si

Used the instructions on the above sticky, to connect the 10si alternator. My light stays on when the ignition is turned off. Wire 1 from the alternator is connected to a light then to ignition switch on the ignition side, this is an independent wire. Also on the ignition side is the resistance wire on another prong of the switch. When I disconnect the resistance wire, the light turns off, when the ignition switch is on the off position. This on a 1966 scout 800. The light did not turn on while it was running, but as soon as I turn it off the light would stay on. What Iím I missing???
Attached Images
 
scoutmax is offline   Reply With Quote
Old 12-29-2017, 09:12 AM   #2
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,805
Default Re: Alternator problem 10si

So you've converted from an externally regulated alternator to the internally regulated 10si. Which IGN switch terminal do you have your idiot bulb connected to? It needs to be a switched ON terminal, not a constant ON terminal. This resistor wire you mention...have you traced it out of the cab to the engine side? I'm suspecting that might be the switched feed to your coil POS terminal.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 12-29-2017, 12:24 PM   #3
scoutmax
Junior Member
 
Join Date: Jan 2017
Member Number: 8522
Posts: 15
Default Re: Alternator problem 10si

Name:  0F93BAC8-FEBE-4313-B494-8A7C2476888F.jpg
Views: 76
Size:  58.7 KB

Name:  6D050005-A4E9-4CF0-AF44-CD0795274D29.jpg
Views: 77
Size:  66.1 KBYes, that resistance wire goes to positive side of the coil and also to r side of starter. Hereís a pic how I have it hooked up, on the ignition switch, is this right? Do have to disconnect any wires? The orange wire is the wire for the light and goes to ignition and alternator. The black taped wire is the resistance wire. Thanks
scoutmax is offline   Reply With Quote
Old 12-29-2017, 01:33 PM   #4
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,805
Default Re: Alternator problem 10si

This is a bit off topic, but since you mentioned it, the wire running between the starter solenoid 'R' terminal and the coil POS terminal should be a standard automotive wire chunk, not a resistor wire. This is the resistor bypass feed, which briefly sends full volts to the coil to aid in lighting the cold engine off. When the engine catches and the starter is released, the resistor feed to the coil then supplies reduced voltage to the coil keeping the engine running until the IGN is switched OFF. The resistor wire feed to the coil should run directly from the IGN switch "I" or "ON" or "RUN" terminal to the coil. It shouldn't be going directly to the starter. Also, the original, unmodified length of the resistor wire to the coil is important for achieving correct primary resistance in that circuit. This is not the same resistor wire that may or may not have originally been used in your Scout to excite the alternator charge feature. That's a different wire altogether, as discussed in Mayben's "10si" sticky thread you've been referring to. So double check all that. I could see the potential for a voltage back feed if the coil resistor wire routing had deviated from what I described above.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 12-29-2017, 04:27 PM   #5
scoutmax
Junior Member
 
Join Date: Jan 2017
Member Number: 8522
Posts: 15
Default Re: Alternator problem 10si

The resistance wire only goes to the connector to the ignition switch then on the outside it is regular wire that goes to the coil and the another wire to r on the starter, just like the circuit diagram scout 800. Iíll have to double check the wires and maybe my alternator is bad. Iíll take the alternator to autozone have it checked.
scoutmax is offline   Reply With Quote
Old 12-29-2017, 04:47 PM   #6
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,805
Default Re: Alternator problem 10si

Ok, so is the actual resistor wire portion longer than you think it would need to be, with the excess length folded into a bundle and wrapped in electrical tape?

Yes, I think having your alternator tested is a good move.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 12-29-2017, 05:20 PM   #7
scoutmax
Junior Member
 
Join Date: Jan 2017
Member Number: 8522
Posts: 15
Default Re: Alternator problem 10si

No, the resistance wire just goes to the fire wall connector and to the ignition switch, there is no more wire in the electrical tape, although I did cut a small piece to put a connector and did not have trouble starting it before. I think my best bet to have the alternator tested and go from there.
scoutmax is offline   Reply With Quote
Old 12-29-2017, 09:33 PM   #8
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,805
Default Re: Alternator problem 10si

Hmm. Yeah the trouble I'm thinking of wouldn't be in getting the engine started, but in keeping the coil from overheating and the points from failing prematurely due to insufficient resistance. If you have a handheld multimeter, it would be easy to measure the resistance across both ends of that resistor wire to see what the value is in ohms. I'm used to the later IH vehicles which had the resistor wire moved outside into the engine bay. These Scouts with the resistor wire in the cabin intrigue me.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 12-30-2017, 02:02 PM   #9
scoutmax
Junior Member
 
Join Date: Jan 2017
Member Number: 8522
Posts: 15
Default Re: Alternator problem 10si

Hey, got the alternator working, bad alternator. Seem everything was hooked up right, just bad alternator. Thanks scoutboy74 for the help, it sure helps us new guys, having this information on the forums.
scoutmax is offline   Reply With Quote
Old 12-30-2017, 07:15 PM   #10
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,805
Default Re: Alternator problem 10si

Good deal.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 03:02 AM.