IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > IH Parts America Area > New Products at IH Parts America
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 09-07-2017, 08:57 AM   #76
Mark Pietz
Senior Member
 
Join Date: Aug 2010
Member Number: 2143
Age: 65
Posts: 582
Default Re: Aluminum Radiators for Scout II

Quote:
Originally Posted by Craig View Post
The switch that connects to the radiator, is opened once the scout is up to temp. One could use any water port on the intake or tstat housing if need for smog verification. Unless you don't mind welding a port on the radiator.
These were used on the 345 79/80 Scouts and the radiator is the specific place where they were "needed". IIRC, this is where it is shown on the smog decal. Having gone through several CA inspections with an '80, I don't know that I'd risk failing the visual by eliminating it.
Mark Pietz is offline   Reply With Quote
Old 09-07-2017, 09:22 AM   #77
Michael Dimock
IH Parts America Sales Assoc.
 
Michael Dimock's Avatar
 
Join Date: Sep 2008
Member Number: 581
Location: Grass Valley, Ca
Posts: 637
Default Re: Aluminum Radiators for Scout II

Eric,

The two small fittings in the radiator are for the transmission cooler and both will have a line going to the transmission. The orientation of the lines doesn't matter if you are routing new ones. Thanks.
__________________
Workin' at IHPA

62 Scout 80, SOA, RS, 54's/63's, 196, T-18, D-18, Waggy 44's, 5.38's, and Zip/Spool.
Michael Dimock is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 03:32 AM.