IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Axle Tech Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 06-19-2018, 06:52 AM   #1
HOGGY
Junior Member
 
Join Date: May 2015
Member Number: 7685
Posts: 4
Default LEAN DOWN ON DRIVER SIDE

OK - So this is probably old news to many of you but this is my first Scout so it is new to me and thus I am trying to learn as much as I can about these beast!

1974 Scout II 4X4
V8 345

I have been told that Scouts have a natural lean down on the driver's side and that is just the way they came off the production line and to fix it the engineers put a spacer on the passenger side. I have also heard that because of the engine and drivetrain there is so much torque that the engineers designed the driver side to sit lower at idle / off but when the vehicle was in motion the torque would lift the driver side up a bit to compensate for the lean. Never the less mine has a lean to it. I have measured the axle to the ground and they are the same on both sides. The body mounts are all the same size and in new condition. The truck has never been in an accident.

Is this just the way it is when sitting still or is there anything that appears to have been done wrong? Any suggestions / thoughts would be helpful.

See attached photos of how it is set up.

Thanks
Attached Images
File Type: jpg 2018-05-30 15.35.07.jpg (68.5 KB, 31 views)
File Type: jpg 2018-06-14 18.33.588.jpg (51.2 KB, 29 views)
File Type: jpg 2018-06-14 18.34.000.jpg (52.9 KB, 28 views)
File Type: jpg 2018-06-14 19.00.199.jpg (24.8 KB, 29 views)
HOGGY is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 10:08 PM.