IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Axle Tech Questions
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 07-30-2018, 08:58 AM   #1
Winchested
Junior Member
 
Join Date: Jul 2018
Member Number: 9303
Posts: 18
Default Front driveshaft length after SOA and RS?

So my question with this is...

Now that the shackles will swing rear ward should I measure for the front shaft at compressed length or extended length or in the center of travel?


I've got 79 bronco cv shafts to use front and rear will likely have to be re-tubed.

The stock front shaft was 22 1/4 collapsed and the bronco shaft is 27 1/2". This is from outside to inside of the u joints.

I'm running a manual so no need to worry about the CV hitting the trans.
Winchested is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 09:10 AM.