IH PARTS AMERICA
Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Brake Tech
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Reply
 
Thread Tools Display Modes
Old 03-01-2018, 10:38 AM   #1
JRM
Junior Member
 
Join Date: Mar 2018
Member Number: 9154
Posts: 6
Default 1970 International 1300D

Hello Experts,

Very recently aquired my grandfathers old truck. It is barn fresh and needs some love but it very solid. Title says it is a 1970 1300. Do you all agree? Please check out the picture. I want to use this truck so it needs to be safe. Any front and or rear drum to disk conversions that will fit this 2wd truck?

Thanks a lot guys. I'm looking forward to getting my hands dirty on this one.

-JRM
Attached Images
 
JRM is offline   Reply With Quote
Old 03-01-2018, 03:50 PM   #2
Scoutboy74
Moderator
 
Scoutboy74's Avatar
 
Join Date: Apr 2008
Member Number: 453
Location: Daze Crick, Jefferson
Posts: 3,925
Default Re: 1970 International 1300D

Based on the round body style and the grille, I would say it is either a '67 or a '68 1300C...but definitely not a 1970 1300D, as the switch to that body style happened in 1969. It has a one-ton payload rating. These trucks aren't exactly speed demons. They stopped well enough when new to be as safe as any other vehicle on the road at that time.
How do you plan to use it? Have you removed wheels and drums to begin inspecting components? If not, I'd start with triaging what you have first to figure out what exactly needs to be replaced and what doesn't. Many normal replacement brake parts are still readily available for these trucks, but less frequently replaced items like drums might be tougher to source.
Does it have a vacuum assist brake booster between the firewall and master cylinder?
I don't see you "kitting" your way to a dramatically updated braking system with your current axles. Even if such a kit existed, it would be extremely expensive. If disk brakes are a must-have, and if after you've actually assessed the condition of the current brake system and found it too far gone to be viable, then you're most likely looking at sourcing quite a few matched parts from a more modern, one ton donor truck to make it a reality, either Ford, Chevy or Dodge with dual rear wheels.
__________________
Favorite hobby...Driving Salma Hayek in my Scout

Coal Trickle - '99 Dodge Ram 2500 Q-Cab SWB 4x4 - 5.9L 24V CTD/NV4500
Hooty - '74 SII - 392/TF727/D20/3.73 D44's/Spartan FA/Krac-lok RA/RC 4" SUA/34x10.5 TSLs/33g Fuel/HFT 8k winch
Mongo - '71 1210 Std Cab 2WD - 345/TF727/RA17 D60 4.10 Trac-lok - "Mongo love candy! Duh, huh, huh!"
Scoutboy74 is offline   Reply With Quote
Old 03-02-2018, 03:45 AM   #3
JRM
Junior Member
 
Join Date: Mar 2018
Member Number: 9154
Posts: 6
Default Re: 1970 International 1300D

Thanks a lot for your help and information. I greatly appreciate the advice and ideas.
JRM is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 08:44 PM.