Click Here!

Go Back   IH PARTS AMERICA > Tech Forums > Brake Tech
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read Photo Gallery IH Store Home

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2017, 02:56 PM   #1
Join Date: Jan 2017
Member Number: 8515
Posts: 38
Default disc brake piston won't retract

I put the TSM rear disc brake conversion on a '74 scout II. The directions said to take the calipers off the bracket to bleed them, so I did. After bleeding, one side was fine but the piston on the other side was pretty far out. When I tried to retract it turning clockwise with a needlenose pliers, it came out farther instead of retracting. Rented the piston retraction tool from AZ and even using that I can't get the piston to turn and retract. What can I do? Did I do something wrong or is the caliper bad?
meisterj is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -8. The time now is 06:25 AM.