View Single Post
Old 05-24-2010, 02:42 PM   #79
Robert Kenney
IHPA Tech Moderator
 
Robert Kenney's Avatar
 
Join Date: Aug 2008
Member Number: 543
Location: So Cal
Age: 49
Posts: 3,310
Default Re: Before and After of My Scout 80 CS

4" bolt cl shackle will give you a bit more than 3/4 lift.

4 degree is perfect to compensate for the shackle. You don't need any for the spring lift as it won't alter caster. 6 would be to much.


Depending on your existing spring pack thickness you May need u-bolts but you May not. I waited to see and installed new ones for safety's sake.

I welded a bung into my angle spacer to pilot in to the axle perch and used the existing spring center bolt to pilot into the angle spacer.
You could buy a spring bolt with a longer head to pilot the entire thickness. I didn't have access to any so I did it my way.
__________________
Robert Kenney

“Don't lift until the fear of death over comes the fear of speed.” Author Unknown
Robert Kenney is offline   Reply With Quote